40V Max XGT Impact Driver With Makpac Case (Body Only)

The TD001G impact driver is an example of what XGT makes possible. In addition to the 4 adjustable speeds, this impact driver has 6 automatic positions. There are 2 T-positions, 3 positions for working with bolts, and there is also an auto stop mode when turning backwards. There is an automatic mode for screwdriving into wood, the machine starts at low speed until the screw gets resistance in the material. This way you keep maximum control. Under the head of the machine is a quick-change button with which you can quickly switch between the 4 adjustable speeds. But this quick-change button can also be programmed, so that you can quickly change to one of the 6 automatic settings and one of the 4 speeds.

Technical

• Voltage: 40 v
• Standard Bolt M5-M16:
• High Tensile Bolt M5 M14:
• Coarse thread (length): 22 – 125 mm
• Max Fastening Torque 220 Nm
• Blows per Minute: (Max) – ipm 0 – 4,400 ipm
• Battery: Type Lithium-ion
• Vibration K factor: 1.5 m/sec
• Noise sound pressure: 96 dB(A
• Noise sound power: 107 dB(A)
• Noise K factor: 3 dB(A)
• Body only machine: Yes
• No load speed: (max/hard/med/soft) 0- 3700 / 3200 / 2100 / 1100 rpm
• Vibration: Impact tightening of fasteners @ max capacity: 10.0 m/sec
• Driving Shank: 6.35mm (1/4″) Hex
• Blows per Minute: (Hi) – ipm 0 – 3,600 ipm
• Blows per Minute: (Med) – ipm 0 – 2,600 ipm
• Blows per Minute: (Lo) – ipm 0 – 1,100 ipm
• Machine Screw M4 M8:
• Motor Type Brushed: