Ford F150 (2012-2014) OEM Replacement Backup Camera OE Part # EL3Z-19G490-D, BL3Z-19G490-B, AL3Z-19G490-A, CL3Z-19G490-C, CL3Z-19G490-D

Master Tailgaters Replacement for Ford F150 Backup Camera (2012-2014) OE Part # EL3Z-19G490-D, BL3Z-19G490-B, AL3Z-19G490-A, CL3Z-19G490-C, CL3Z-19G490-D

Replaces Model Number: EL3Z-19G490-D, BL3Z-19G490-B, AL3Z-19G490-A, CL3Z-19G490-C, CL3Z-19G490-D

For use with: Ford F150 (Years 2012-2014)

This is an aftermarket backup camera, not OEM. This camera will plug into your existing wire harness. If your vehicle currently does NOT have a backup camera system, this camera will not work. Double Check your part number prior to ordering.

STEP ONE: CALL
Before ordering this item:
First, you need to call the Parts Department of your local dealer to find out your exact Part Number.

STEP TWO: CHECK
Double check your Part Number with our part number to confirm.

• Oftentimes, people buy the wrong camera because they only match the model/year of their car.
• To avoid this, you just need to compare your part number to this one and make sure they match!

STEP THREE: PURCHASE
Once you complete steps ONE and TWO, and confirmed a match, you can purchase this camera without having to worry about whether or not if it will work for your vehicle!

Camera Specs:

• Sensor: On-Semi (USA) CMOS Active Pixel Array, Lens: Nidec (Japan) (Glass + Plastic)
• Minimum Illumination : .1 Lux light sensitivity
• Signal System : NTSC/PAL
• Effective Pixel : 728 x 582
• Electronic Shutter : 1/50 to 1/100,000 seconds
• Resolution : 600 TV lines
• Angle : 170 Degrees
• Waterproof Rate : IP68
• Power : DC 6v-12v

**ATTENTION: Before purchasing, make sure to call your local dealer to verify that your part number is an EXACT MATCH to this part number*
[For use with]: Ford F150 (2012 2013 2014) OE Part # EL3Z-19G490-D, BL3Z-19G490-B, AL3Z-19G490-A, CL3Z-19G490-C, CL3Z-19G490-D
[Camera]: Wide angles up to 168(Diagonal) + 100(Vertical) + 136(Horizontal); Designed for low light to .1lux
[Specs] Up to 800TVL; Waterproof to IP69K; Safe working temp from -104F to 220F. Japanese Nidec Lens, OnSemi USA Chip
[Plug and Play]: Plugs into Existing OEM Video Harness, no programming required