Deaf-Bonce Machete ML-12R D2

Product Overview

The Deaf Bonce Machete ML-12R D2 is a high-output 12-inch Dual 2-Ohm (2+2 $\Omega$) subwoofer from Deaf Bonce’s upgraded “R” revision series. Engineered to deliver serious SPL output and musical depth, the ML-12R D2 jumps to an impressive 500 Watts RMS (1000 Watts Max) continuous power ratingmaking it a perfect step-up option for daily drivers and sound-quality setups looking for hard-hitting bass without sacrificing efficiency.

Reinforced Motor Assembly & 2″ High-Temp Voice Coil

The ML-12R D2 upgrades to a larger 2.00-inch copper voice coil coupled with a double-stacked ferrite motor structure. This expanded voice coil surface area greatly increases thermal heat dissipation, enabling the driver to sustain prolonged high-power play without thermal distortion or output compression.

Pressed Paper Cone & High-Excursion Suspension

To handle the increase in power, the driver features a pressed paper cone supported by a thick, high-density foam surround. Paper provides an optimal balance between low moving mass and rigidity, ensuring transient accuracy during fast bass drops. With a linear excursion of $12.00ext{ mm}$ ($X_{\max}$), the driver delivers smooth, deep low-end frequency extension down into the $30ext{ Hz}$ range.

Flexible Wiring Setup

With its Dual 2-Ohm voice coil configuration, you can easily configure a single ML-12R D2 for a 1-Ohm or 4-Ohm final load, or connect a pair together to present a 2-Ohm load to a mono amplifier.

Specifications

Frequently Asked Questions (FAQ)

Q: What is the difference between the Machete ML-12S and the ML-12R subwoofer?

A: The ML-12R is a higher-power model compared to the ML-12S. The ML-12R handles 500W RMS (versus 300W RMS on the 12S), features a larger 2.00-inch voice coil (versus 1.75-inch), and offers increased linear excursion ($12ext{ mm}$ $X_{\max}$ vs $10ext{ mm}$) for deeper and louder output.

Q: What size amplifier is recommended for the Deaf Bonce ML-12R D2?

A: We recommend pairing this subwoofer with a monoblock amplifier capable of delivering between 400 and 600 Watts RMS into a 1-Ohm or 4-Ohm load.

Q: What is the recommended box size for a ported enclosure?

A: The ML-12R D2 performs best in a ported enclosure with a net internal volume of approximately $1.7ext{ cu. ft.}$ ($48 – 50ext{ Liters}$) tuned around $35ext{ Hz}$ for maximum bass response.